Skip to content
Blog

Electrical Maintenance for Large Facilities in Broward

Commercial Electrical Service and Maintenance for Large Facilities in Broward and Miami Dade

A large facility runs on its electrical system the way a body runs on its heart. Most of the time nobody thinks about it. Then a main breaker trips on a hot afternoon, or a feeder fails in a production area, and the whole place stops.

Most of those days can be avoided. Not all, but most. The difference between a facility that has electrical surprises every year and one that rarely does is usually a written maintenance program that someone actually follows.

NFPA 70B used to be a recommended practice that a lot of owners never read. Starting with the 2023 edition, it became a standard, and the current 2026 edition keeps it that way. The core requirement is an electrical maintenance program, or EMP, that is documented and run by the facility.

The idea is simple. You inventory your equipment, assess its condition, set maintenance intervals based on that condition, do the work, and keep records. Equipment in good shape gets longer intervals. Equipment in poor shape, in harsh environments or that is critical to the operation gets shorter ones.

Insurers and corporate risk managers are paying attention to this. If your facility does not have an EMP, expect to be asked for one.

Every facility is different, but a sound program for a large building usually includes:

Annual scans of switchgear, panels, MCCs, transformers and disconnects under normal load. It finds loose connections and overloaded equipment before they fail. Our post on

Large power breakers need exercising, cleaning, lubrication and trip testing. A breaker that has not operated in years may not open when it needs to, and that is the scenario that turns a fault into a fire.

Dust, moisture and heat cycling loosen connections. Cleaning and retorquing during a planned outage prevents a lot of failures.

On transformers, feeders and motors, insulation resistance testing shows deterioration over time.

Monthly exercise, regular inspection and testing under load. A transfer switch that sticks is as bad as a generator that will not start.

If equipment or settings have changed since the last study, the labels may be wrong. That is a worker safety problem.

What was tested, what was found, what was fixed and when. Without records, there is no program.

Our climate is hard on electrical equipment. Humidity gets into gear. Salt air near the coast corrodes bus and terminals, and we see it all along the beachfront from Fort Lauderdale to Hollywood to Miami Beach. Outdoor and rooftop gear bakes in the sun. Hurricane season brings surges, outages, water intrusion and long generator runs, all in the same few months.

We recommend scheduling the heavy maintenance in the spring. Thermography, breaker work and generator testing done in March, April or May means your building goes into June with known problems fixed, instead of finding them in August.

Need this looked at on your building?

Call the Sunrise office or send the address. We will tell you what we see.